Eminence Legend 1028K Speaker

Offered for sale:

Used Eminence Legend 1028K guitar speaker.

This speaker is in very good condition. There has been a bit of silicon reinforcement applied to the cone where a piece of masking tape pulled up a thin layer of the cone...no damage through the cone and not affecting playability. In fact, the tape did such little marring that the silicone was probably not necessary. But we have successfully used silicone caulking, over the decades, to repair speakers with real cone damage. So, we spread around a little silicon here for good measure.

The Eminence Legend 1028K guitar speaker is a classic stage fixture. Vintage American tone with moderate, but tight, percussive lows and extended highs.

Specifications

Nominal Basket Diameter

10", 254 mm

Nominal Impedance*

8 Ω

Power Rating*

Program Power

N/A

Watts

35 W

Resonance

95 Hz

Usable Frequency Range

100 Hz - 5 kHz

Sensitivity*

97.4 dB

Magnet Weight

6 oz.

Gap Height

0.25", 6.4 mm

Voice Coil Diameter

1", 25 mm

THIELE & SMALL PARAMETERS

Resonant Frequency (fs)

95 Hz

DC Resistance (Re)

5.8 Ω

Coil Inductance (Le)

0.51m H

Mechanical Q (Qms)

17.96

Electromagnetic Q (Qes)

1.61

Total Q (Qts)

1.47

Compliance Equivalent Volume (Vas)

31.5 liters / 1.11 cu.ft.

Peak Diaphragm Displacement Volume (Vd)

72.4 cc

Mechanical Compliance of Suspension (Cms)

0.19 mm/N

BL Product (BL)

5.7 T-M

Diaphragm Mass Inc. Airload (MMs)

15 grams

Efficiency Bandwidth Product (EBP)

59

Maximum Linear Excursion (Xmax)

2.1 mm

Surface Area of Cone (Sd)

344.9 cm2

Maximum Mechanical Limit (Xlim)

N/A

MOUNTING INFORMATION

Recommended Enclosure Volume

Sealed

Acceptable

Vented

Acceptable

Driver Volume Displaced

0.027 cu.ft. / 0.77 liters

Overall Diameter

10.11", 256.8 mm

Baffle Hole Diameter

9.13", 231.9 mm

Front Sealing Gasket

Yes

Rear Sealing Gasket

N/A

Mounting Holes Diameter

0.22", 5.6mm

Mounting Holes B.C.D.

9.6", 243.8mm

Depth

4.8", 121.9 mm

Net Weight

2.9 lbs, 1.32 kg

Shipping Weight

4 lbs, 1.81 kgs

MATERIALS OF CONSTRUCTION

Coil Construction

Copper voice coil

Coil Former

Polyimide former

Magnet Composition

Alnico magnet

Core Details

Non-vented core

Basket Materials

Pressed steel basket

Cone Composition

Paper cone

Cone Edge Composition

Paper cone edge

Dust Cap Composition

Solid composition felt dust cap

“We test every used component when we buy it and make sure it up to our standards before we offer it for sale.”

*Please note: we do our best giving descriptions of used pieces. We have found it impossible to describe every mark on an instrument or amp that is not in the "mint" category. Also, what's important to you may not be important to someone else. For example, you may say, "I don't care what it looks like as long as it plays or sounds well." Another person may say, "Body cosmetics are very important to me so tell me about every scratch, nick and blemish." So, please ask the questions that are most important to you. If you ask they will be answered. They are free and there's no limit. Additional photos can also be made available.

This is a specific item that is also being offered for sale in our brick & mortar location. It is possible that it has just been sold. Please ask if it is still available before purchasing.

*It is our policy to require a signature on delivery of all musical instruments. Please let us know if you prefer no signature required when ordering or we will automatically require a signature.

If you prefer your item to be sent without a required signature Imperial Guitar and the selected carrier can no longer be responsible for the security of the package once it has been delivered.